FEATURES:
 Combines four/eight E1 channels and one 10/100M LAN channel over a single fiber optic link
 Extends the range of E1 and LAN traffic over fiber optic up to 40 KM.
 Support of VLAN and flow control
 Comprehensive alarm, monitoring and loopback functions
 Provide one PCM voice service channel, one RS232 console port and one RS232 data port
 Status LEDs
 Compact 1U enclosure
 220VAC or -48VDC power supply<\p>

SPECIFICATIONS£º
E1 Interface
 Baud rate: 2.048Mbps ¡À50ppm
 Line code: HDB3
 Connector: BNC (75¦¸, unbalanced, 120¦¸option available on request)
Fiber Optic Link
 Baud rate: 150Mbps¡À50ppm
 Fiber Optic: single mode, 1310nm
 Power: -2 ~ -11dBm
 Receive sensitivity: better than -36dBm
 Receive dynamic range: 34dBm
 Connector: FC (SC, ST available on request)
Ethernet Port
 Baud rate: 10/100Mbps, half/full duplex, auto-negotiating
 Frame length: 64 ~ 1536 bytes
 MAC address: 1K
 Connector: RJ45
PCM Phone Port
 2-wire 64K PCM, FXS
 Connector: RJ11
Power supply
 Voltage: -48VDC ( -40VDC ~ -60VDC)
 220VAC (75VAC ~ 264VAC)
 Power: 5W
Physical Specifications
 Operating Environment:
 Temperature: 5-500C
 Humidity: 5% ¨C 95%, non-condensing
 Dimensions: 483 x 210 x 44 (mm)
 Weight: 2.5kg<\p>

Typical Application:<\p>

Figure 1-1 PMX OPMUX-FL100 Point-to-point Application

<\p>