| XMD DSL02 is a high speed DSL modem based on G.SDHSL standard, capable of symmetric data (128Kbps ~ 2304Kbps) transmission up to 5.2KM over 2-wire copper line. Its wide choice of DTE interfaces (E1, FE1, 10/100M LAN and Nx64K V.35) makes DSL02 an ideal cost-effective solution for broadband access.<\p> FEATURES:
G.SHDSL (G.991.2) technology gives near fiber transmission quality from 128K to 2304K
Range at 2Mbps: 5.2KM (0.5mm gauge) and 3.6KM (0.4mm gauge) over 2-wire copper wire.
Wide choice of user interfaces: E1, FE1, 10/100M LAN, NX64K V.35
Rate-adaptive transmission range.
Status LEDs and comprehensive diagnostic tools
220VAC or -48VDC power supply<\p> SPECIFICATIONSㄩ
DSL Line Interface
Baud rate: Nx64Kbps (N = 2 ~ 36)
Line code: TCM-16PAM
Impedance: 135次
Connector: RJ48 (2-wire)
E1 Interface
Baud rate: 2.048Mbps㊣50ppm, G.703
Line code: HDB3
Impedance: 120次 (balanced), RJ45 connector
75次 (unbalanced), BNC connector
FE1 Interface
Baud rate: 2.048Mbps㊣50ppm, G.703, G.704
Line code: HDB3
Impedance: 120次 (balanced), RJ45 connector
75次 (unbalanced), BNC connector
V.35 Interface
Baud rate: Nx64Kbps (N = 2 ~ 36)
Mode: V.35/V.11 DCE
Connector: DB25F
Ethernet Interface
Baud rate: Nx64Kbps (N = 2 ~ 36), IEEE802.3
Connector: RJ45
Console Port
RS232 mode, 9600bps, async
Power supply
Voltage: -48VDC ( -36VDC ~ -72VDC), 6W
220VAC (85VAC ~ 265VAC), 6W
Physical Specifications
Operating Environment:
Temperature: -100C ~ 500C
Humidity: 5% 每 95%, non-condensing
Dimensions: 228 x 243 x 58 (mm)
Weight: 1kg
TYPICAL APPLICATIONSㄩ
 Figure 1-1 XMD DSL02 Application with Ethernet mode  Figure 1-2 XMD DSL02 Application with E1 mode
 Figure 1-3 XMD DSL02 Application with Ethernet & E1 mode  Figure 1-4 XMD DSL02 Application with V.35 mode
<\p>
<\p>
|
